dmesg - TOSHIBA DT01ACA2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-25-generic (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bdddcfff] usable
BIOS-e820: [mem 0x00000000bdddd000-0x00000000bdde3fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdde4000-0x00000000beac5fff] usable
BIOS-e820: [mem 0x00000000beac6000-0x00000000befecfff] reserved
BIOS-e820: [mem 0x00000000befed000-0x00000000ceadefff] usable
BIOS-e820: [mem 0x00000000ceadf000-0x00000000ceb43fff] reserved
BIOS-e820: [mem 0x00000000ceb44000-0x00000000ceb89fff] usable
BIOS-e820: [mem 0x00000000ceb8a000-0x00000000cecc0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cecc1000-0x00000000ceffefff] reserved
BIOS-e820: [mem 0x00000000cefff000-0x00000000ceffffff] usable
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Pro4, BIOS P2.20 05/12/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 0420000000 mask 7FF8000000 write-back
3 base 0428000000 mask 7FFC000000 write-back
4 base 042C000000 mask 7FFE000000 write-back
5 base 042E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 base 00D0000000 mask 7FF0000000 uncachable
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 16896MB, range: 128MB, type WB
reg 3, base: 17024MB, range: 64MB, type WB
reg 4, base: 17088MB, range: 32MB, type WB
reg 5, base: 17120MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
reg 7, base: 3328MB, range: 256MB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16896MB, range: 256MB, type WB
reg 7, base: 17136MB, range: 16MB, type UC
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd1a0-0x000fd1af] mapped at [ffff8800000fd1a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x42ee00000-0x42effffff]
[mem 0x42ee00000-0x42effffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x42edfffff]
[mem 0x420000000-0x42edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41fffffff]
[mem 0x400000000-0x41fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbdddcfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbdbfffff] page 2M
[mem 0xbdc00000-0xbdddcfff] page 4k
init_memory_mapping: [mem 0xbdde4000-0xbeac5fff]
[mem 0xbdde4000-0xbddfffff] page 4k
[mem 0xbde00000-0xbe9fffff] page 2M
[mem 0xbea00000-0xbeac5fff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0xbefed000-0xceadefff]
[mem 0xbefed000-0xbeffffff] page 4k
[mem 0xbf000000-0xce9fffff] page 2M
[mem 0xcea00000-0xceadefff] page 4k
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0xceb44000-0xceb89fff]
[mem 0xceb44000-0xceb89fff] page 4k
init_memory_mapping: [mem 0xcefff000-0xceffffff]
[mem 0xcefff000-0xceffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35a30000-0x36d0ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CEC8E088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000CEC9F070 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CEC8E1B8 010EB1 (v02 ALASKA A M I 00000211 INTL 20120711)
ACPI: FACS 0x00000000CECC0F80 000040
ACPI: APIC 0x00000000CEC9F180 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CEC9F1F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000CEC9F240 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CEC9F780 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CECA02F8 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117)
ACPI: MCFG 0x00000000CECA04C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000CECA0500 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CECA0538 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000CECA08A8 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: AAFT 0x00000000CECA6408 000471 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: UEFI 0x00000000CECA6880 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: DMAR 0x00000000CECA68C8 000080 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: SSDT 0x00000000CECA6948 000579 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
NODE_DATA(0) allocated [mem 0x42eff6000-0x42effafff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e600000-ffff88042e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x42effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbdddcfff]
node 0: [mem 0xbdde4000-0xbeac5fff]
node 0: [mem 0xbefed000-0xceadefff]
node 0: [mem 0xceb44000-0xceb89fff]
node 0: [mem 0xcefff000-0xceffffff]
node 0: [mem 0x100000000-0x42effffff]
Initmem setup node 0 [mem 0x00001000-0x42effffff]
On node 0 totalpages: 4183444
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13144 pages used for memmap
DMA32 zone: 841208 pages, LIFO batch:31
Normal zone: 52160 pages used for memmap
Normal zone: 3338240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbdddd000-0xbdde3fff]
PM: Registered nosave memory: [mem 0xbeac6000-0xbefecfff]
PM: Registered nosave memory: [mem 0xceadf000-0xceb43fff]
PM: Registered nosave memory: [mem 0xceb8a000-0xcecc0fff]
PM: Registered nosave memory: [mem 0xcecc1000-0xceffefff]
PM: Registered nosave memory: [mem 0xcf000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88042ec00000 s86144 r8192 d32640 u524288
pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4118055
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16369148K/16733776K available (7918K kernel code, 1172K rwdata, 3752K rodata, 1408K init, 1292K bss, 364628K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3499.083 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6998.16 BogoMIPS (lpj=13996332)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 29988 entries in 118 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000cee9e000 end: 0x000000ceeacfff
IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27992.66 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbdddd000-0xbdde3fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xceb8a000-0xcecc0fff] (1273856 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:00:43, date: 04/04/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 15 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041C334800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041C0CA000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041C309400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xef120000-0xef12ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xef13a000-0xef13a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xef100000-0xef11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xef138000-0xef138fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xef137000-0xef1373ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xef130000-0xef133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xef136000-0xef1363ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xef135000-0xef1357ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xef134000-0xef1340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02-03] (subtractive decode)
pci 0000:00:1c.2: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.2: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:02:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:02:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
pci 0000:04:00.0: [10de:13c2] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xee000000-0xeeffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:04:00.0: reg 0x30: [mem 0xef000000-0xef07ffff pref]
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:04:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xef080000-0xef083fff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:04:00.0
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbdddd000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbeac6000-0xbfffffff]
e820: reserve RAM buffer [mem 0xceadf000-0xcfffffff]
e820: reserve RAM buffer [mem 0xceb8a000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xeffe0000-0xeffeffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 02-03]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:02: resource 13 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:03: resource 13 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xee000000-0xef0fffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 128), using 64 bytes
pci 0000:04:00.0: Video device with shadowed ROM
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19328K (ffff880035a30000 - ffff880036d10000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcaadf000-0xceadf000] (64MB) mapped at [ffff8800caadf000-ffff8800ceadefff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1459774843.396:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90009c00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-25-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-25-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xef137000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xef136000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc (null): invalid alarm value: 2016-4-4 18:0:61
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 12:625:27
memory memory67: hash matches
rtc_cmos 00:02: setting system clock to 2016-04-04 13:00:43 UTC (1459774843)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
systemd-udevd[118]: starting version 204
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xef135000 port 0xef135280 irq 26
ata5: DUMMY
ata6: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:36:e5:13
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-2: new low-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 3:0:0:0: [sda] Attached SCSI disk
usb 1-2: New USB device found, idVendor=2188, idProduct=0ae1
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB OPTICAL MOUSE
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:2188:0AE1.0001/input/input4
hid-generic 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-2/input0
usb 3-1: New USB device found, idVendor=8087, idProduct=8009
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8001
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 1-11: new high-speed USB device number 3 using xhci_hcd
usb 1-11: New USB device found, idVendor=0930, idProduct=6544
usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-11: Product: TransMemory
usb 1-11: Manufacturer: TOSHIBA
usb 1-11: SerialNumber: EF8AB62FFB60CCC123B9B970
usb 1-11: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 1-11: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 1-11:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-11:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 3498.984 MHz
random: init urandom read with 70 bits of entropy available
init: plymouth-upstart-bridge main process (192) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (204) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (206) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (207) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (209) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (210) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (212) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (213) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (215) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (216) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (218) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
scsi 6:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
random: nonblocking pool is initialized
Switched to clocksource tsc
Adding 1998844k swap on /dev/sda5. Priority:-1 extents:1 across:1998844k FS
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
systemd-udevd[352]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
MXM: GUID detected in BIOS
ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
checking generic (e1000000 130000) vs hw (d0000000 10000000)
checking generic (e1000000 130000) vs hw (e0000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0x124020a1
nouveau [ DEVICE][0000:04:00.0] Chipset: GM204 (NV124)
nouveau [ DEVICE][0000:04:00.0] Family : NV110
nouveau [ VBIOS][0000:04:00.0] using image from PROM
nouveau [ VBIOS][0000:04:00.0] BIT signature found
nouveau [ VBIOS][0000:04:00.0] version 84.04.1f.00.2b
nouveau [ PMC][0000:04:00.0] MSI interrupts enabled
nouveau [ PFB][0000:04:00.0] RAM type: GDDR5
nouveau [ PFB][0000:04:00.0] RAM size: 4096 MiB
nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
[TTM] Zone kernel: Available graphics memory: 8195260 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 4096 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.1
nouveau [ DRM] DCB outp 00: 01000f02 00020030
nouveau [ DRM] DCB outp 01: 02000f00 00000000
nouveau [ DRM] DCB outp 02: 04811f82 00020030
nouveau [ DRM] DCB outp 03: 02822f62 00020010
nouveau [ DRM] DCB outp 05: 02833f76 04400020
nouveau [ DRM] DCB outp 06: 02033f72 00020020
nouveau [ DRM] DCB outp 15: 01df4ff8 00000000
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 01000131
nouveau [ DRM] DCB conn 02: 00010261
nouveau [ DRM] DCB conn 03: 00020346
nouveau [ DRM] DCB conn 04: 00000470
nouveau W[ DRM] unknown connector type 70
nouveau W[ DRM] failed to create encoder 1/8/0: -19
nouveau W[ DRM] Unknown-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau E[ DRM] failed to initialise sync subsystem, -38
nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo ffff880418fc9800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:04:00.0: registered panic notifier
[drm] Initialized nouveau 1.2.1 20120801 for 0000:04:00.0 on minor 0
snd_hda_intel 0000:04:00.1: Disabling MSI
snd_hda_intel 0000:04:00.1: Handle VGA-switcheroo audio client
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.4/0000:04:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.4/0000:04:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.4/0000:04:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.4/0000:04:00.1/sound/card1/input15
audit: type=1400 audit(1459774848.389:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=479 comm="apparmor_parser"
audit: type=1400 audit(1459774848.389:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=479 comm="apparmor_parser"
audit: type=1400 audit(1459774848.389:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=479 comm="apparmor_parser"
audit: type=1400 audit(1459774848.389:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=478 comm="apparmor_parser"
audit: type=1400 audit(1459774848.389:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=478 comm="apparmor_parser"
audit: type=1400 audit(1459774848.389:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=478 comm="apparmor_parser"
audit: type=1400 audit(1459774848.389:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=479 comm="apparmor_parser"
audit: type=1400 audit(1459774848.389:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=479 comm="apparmor_parser"
audit: type=1400 audit(1459774848.389:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=478 comm="apparmor_parser"
init: avahi-cups-reload main process (626) terminated with status 1
audit_printk_skb: 9 callbacks suppressed
audit: type=1400 audit(1459774848.913:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1459774848.913:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1459774848.913:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=614 comm="apparmor_parser"
init: failsafe main process (597) killed by TERM signal
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit: type=1400 audit(1459774850.865:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=755 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit: type=1400 audit(1459774853.969:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=873 comm="apparmor_parser"
audit: type=1400 audit(1459774853.969:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=873 comm="apparmor_parser"
audit: type=1400 audit(1459774853.969:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=873 comm="apparmor_parser"
audit: type=1400 audit(1459774853.969:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=873 comm="apparmor_parser"
audit: type=1400 audit(1459774853.969:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=873 comm="apparmor_parser"
audit: type=1400 audit(1459774853.969:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=873 comm="apparmor_parser"
audit: type=1400 audit(1459774853.969:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=877 comm="apparmor_parser"
audit: type=1400 audit(1459774853.973:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=878 comm="apparmor_parser"
audit: type=1400 audit(1459774853.973:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=878 comm="apparmor_parser"
audit: type=1400 audit(1459774853.973:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=878 comm="apparmor_parser"
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: alsa-restore main process (964) terminated with status 99
systemd-hostnamed[4041]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=56)
Initialized host personality
NET: Registered protocol family 40
NET: Unregistered protocol family 40
vmmon: module verification failed: signature and/or required key missing - tainting kernel
/dev/vmmon[6187]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[6187]: Using tsc_khz as TSC frequency: 3498984
/dev/vmmon[6187]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=56)
Initialized host personality
NET: Registered protocol family 40
/dev/vmnet: open called by PID 6275 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 6282 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 6286 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 6291 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 6292 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 6295 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
init: cups main process ended, respawning
audit_printk_skb: 120 callbacks suppressed
audit: type=1400 audit(1459776278.334:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6400 comm="apparmor_parser"
audit: type=1400 audit(1459776278.334:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6400 comm="apparmor_parser"
audit: type=1400 audit(1459776278.334:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6400 comm="apparmor_parser"
NET: Unregistered protocol family 40
/dev/vmmon[6459]: Module vmmon: unloaded
/dev/vmmon[6489]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[6489]: Using tsc_khz as TSC frequency: 3498984
/dev/vmmon[6489]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=56)
Initialized host personality
NET: Registered protocol family 40
/dev/vmnet: open called by PID 6574 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 6583 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 6588 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 6598 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 6599 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 6602 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
usb 1-11: USB disconnect, device number 3
FAT-fs (sdb1): unable to read boot sector to mark fs as dirty
usb 1-11: new high-speed USB device number 4 using xhci_hcd
usb 1-11: New USB device found, idVendor=0930, idProduct=6544
usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-11: Product: TransMemory
usb 1-11: Manufacturer: TOSHIBA
usb 1-11: SerialNumber: EF8AB62FFB60CCC123B9B970
usb 1-11: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 1-11: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 1-11:1.0: USB Mass Storage device detected
scsi host7: usb-storage 1-11:1.0
scsi 7:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 7:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
/dev/vmmon[7782]: PTSC: initialized at 3900000000 Hz using TSC, TSCs are synchronized.
/dev/vmmon[7782]: Monitor IPI vector: ff
/dev/vmmon[7782]: HV IPI vector: f2
/dev/vmnet: open called by PID 7799 (vmx-vcpu-0)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 7799 (vmx-vcpu-0)
/dev/vmnet: port on hub 8 successfully opened